1.72m/3.1m print width with Epson's Micro Piezo head.
Able to print on almost any substrate with UV curing technology.
For indoor light box.
Traditional double sided light box need print at both side, 100% precision is extremely difficult to reach. The CMYK+White+CMYK mode makes print on same side makes double sided products gets 100% precision.
For transparant media; For media with colored back ground;
Glossy oil for protect image or lamination;
High speed printing on sppecial media such as leather, curtain;
Cold light source, supports printing on almost any substrate including thermosensitive media.
Print Head: Three DX7
Type: UV printing
Ink Colors: CMYK(W+Glossy oil) 3*4Cartriages*350m
Maximum Resolution: 720*1440dpi
Height of Printhead: Adjustable 2 to 5mm
Interface: USB 2.0
Printing width: 1.8m/3.2m
4+1 Pass 21sqm per hour.
(4+1/4+4Pass is suggested for UV printing)
RIP Software: IPrint for free, Optional Photoprint DX/Servo/Pro
Heater: Pre and Post heating to 80 celsius degree with PID control(Since ink will dry under UV light, the heat system should be operated depends on media)
The printer is equipment with
1) Take up system
2) Feeding system
3) Two inbuilt heaters
4) Cooling fan
* IR heater, Bulk Ink supply system are Optional
5) 110V/220V Eco-Solvent/Water-Base, Plug type
Link:* * https://www.youtube.com/watch?v=vSugJvvzDLk
If use DX5 head, printer is able to install 1/2 heads.
If use DX7 head, it is able to install 1/2/3 heads.